DIY FLAMINGO PUSH PINS

pink-sparkley-flamingosDIY-flamingo-push-pinsdiy-flamingo-thumb-tacks

Hey! Did you know there is a national swap ideas day?? I just found this out and it kind of sounds like the best holiday for us creatives!  So of course I said yes to a blogger swap with some other fabulously talented ladies (keep reading to see what was swapped and where).  This swap was office inspired so I bring you…. glittery flamingo push pins!

My obsession with flamingos runs deep!  Ask anyone that knows me since elementary school, because I have loved them for that long.  NO joke!  So now that they are trendy I can scream it from the roof tops ha ha or just make DIY’s that involve flamingos.  Either way I am excited to share these DIY flamingo push pins.   They are super simple to make AND what I used to make them is something all you crafters have laying around.DIY-push-pinsflamingo-thumb-tacks

SUPPLIES
Flamingo Silicone Ice Cube Trays (And they are half off!!)
Hot Glue Gun
Push Pins
-Pink Acrylic Paint
Mod Podge
Iridescent fine glitter (color: bubble gum)
X-Acto Knife

-Take your glue gun and fill in the flamingo molds.  Its best to fill it so much it is on the verge of overflowing.  That way all the spots are filled.  Be sure to fill slowly so you don’t cause too many air bubbles.
-Take your push pin and put it in the wet glue.  Keep checking on it and make sure it stays upright, because they tend to lean.
-Once it’s completely dry, pop it out.
-You can take an x-acto knife and cut off any excess pieces and make it more smooth.
-Paint the flamingo.  You will have to do a few coats.
-Once the paint has dried, paint on some mod podge.
-Stick and roll in the glitter till its covered.
-Now take your sparkly fun flamingo and hang some cute stuff.
Make-your-own-flamingo-push-pins

Now onto what I received from the swap…
You have to see the amazing mini marquee lights I received from A Joyful Riot.  Seriously guys…I’m kind of obsessed!  Check out the DIY here

Be sure to see the other amazing projects and what was swapped!

A Joyful Riot   @ajoyfulriot
J. Sorelle Blog
   @jsorelle3
One Little Minute Blog   @livefreemiranda
Christina Williams Blog   @christinawilliamsblog

Leave a Reply to christina williams Cancel reply

Your email address will not be published. Required fields are marked *

21

21 thoughts on “DIY FLAMINGO PUSH PINS

    Saz

    This is such a cute and easy idea!

    // Oh Dollymix

    Miranda

    Okay, so cute and seriously what a fun craft! I keep thinking of all of the possibilities! Who knew silicon and hot glue were such buds. So happy to have been a swapper with you to be introduced to your darling self and blog!

    xoxo Miranda

    I know ha ha, I want to make a million different kinds ;) You were the best swapper Thanks!!

    Cyd

    These are SO awesome! You just keep killin’ it and I just love these.

    Your the sweetest Cyd thanks! Gotta get in my flamingo fix ;)

    christina williams

    This is so great!!! I’m going to make some today. Adorable!

    PJ Feinstein

    Push pins made from ice cube trays? This is why I’m not a DIYer — I’m not that creative!

    ha ha oh there is so much that can be done with ice cube trays ;)

    brooke

    This is amazing. Im blown away how you come up with this stuff…love it all!

    brooke

    Oh! And you changed your name! It looks great!!

    Thanks Brooke!! ha ha I know!! so many changes but It’s all so exciting.

    What a great idea! great post

    http://xoxobella.com

    Thanks Bella! Make some! You can use any shape

    ElenaB.

    I love flamingos!! :D :D This is an amazing idea!
    I’m going to buy Flamingo Silicone Ice Cube Trays ASAP!

    Have a great day!

    xx Elena

    http://www.talonsetbonbons.com